 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP7679C1QBC/D Technical Data ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features: * High Luminance output. * Design for High Current Operation. * Uniform Color. * Low Power Consumption. * Low Thermal Resistance. * Low Profile. * Packaged in tubes for use with automatic insertion equipment. * RoHS Compliant. Typical Applications: *Automotive Exterior Lighting. *Electronic Signs and Signals. *Specialty Lighting. Benefits: *Outstanding Material Efficiency. *Electricity savings. *Maintenance savings. *Reliable and Rugged. SPEC NO: DSAH3826 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1101017708 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25C PARAMETER DC Forward Current Power dissipation Reverse Voltage Operating Temperature Storage Temperature Lead Solder Temperature[1] QB/D 30 126 5 -40 To +85 -40 To +85 260C For 5 Seconds UNITS mA mW V C C 1.1.5mm[0.06inch]below seating plane. SPEC NO: DSAH3826 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1101017708 Selection Guide Iv(cd)[1] @30mA Min. WP7679C1QBC/D Blue (AlInGaN) 0.38 Typ. 0.9 Viewing Angle[2] 21/2 Typ. 70 Part No. LED COLOR Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%. 2.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25C IF=30mA Rj-a=200C/W DEVICE TYPE PEAK WAVELENGTH PEAK (nm) TYP. DOMINANT[1] WAVELENGTH DOM (nm) TYP. SPECTRAL LINE WAVELENGTH 1/2(nm) TYP. QB/D 468 470 25 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25C FORWARD VOLTAGE [1] VF (VOLTS) @ IF=30mA TYP. MAX. REVERSE CURRENT IR (uA) @ VR=5V MAX. CAPACITANCE C (pF) @ VF=0V F=1MHZ TYP. THERMAL RESISTANCE Rj -pin C/W TYP. DEVICE TYPE QB-D 3.5 4.2 10 100 180 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAH3826 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1101017708 Figures SPEC NO: DSAH3826 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1101017708 PACKING & LABEL SPECIFICATIONS WP7679C1QBC/D SPEC NO: DSAH3826 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1101017708 |
Price & Availability of WP7679C1QBCD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |